Dynamic Balancing: (applies to larger saw blades)
A brand new tire is always balanced! It is put on a balancing machine and spun at high speed; counter weight (lead) is added to the spots required. The tire then gets installed on the car. This procedure eliminates a host of mishaps including the possibility of an auto accident. Our saw blades are finished with this crucial advantage in mind. After our saw blades have been brazed and put through a 2 step sharpening process to insure the utmost quality, they are mounted on a highly exacting balance machine and run at high speed.


A gauge indicates at what points as well as the exact mass of material that needs to be removed in order to have a balanced large diameter circular saw blades(see photo below). Balancing will dramatically extend the life of your machine by reducing ;arbor pull.

Dynamic Straightness:
Is our unique method to reduce run out without hammering the saw blade. After years of producing blades we have found that the molecules in the steel have memory and tend to rebound to their original form. This method keeps the saw blades running true much longer resulting in a better quality of cut.

Tensioning: The depression ring usually evident on any better saw blade is one of the final steps in the production process. Each saw blade goes through stress at time of cutting; this ring disperses the stress throughout eliminates dishing and warping.